Kling-freitag K&F ACCESS T9 Manuel d'utilisateur télécharger pdf (Page 22)

User’s Manual ACCESS SYSTEM

7. K&F CD 44 Digital System Controller

When using the Access System with CD 44, please refer the User's manual of the K&F

CD 44 Digital System Controller.

8. The ACCESS Controllers

If you have ACCESS subwoofers with Speakon connector where both drivers

are connected in parallel at pins 1+ / 1- (standard connection since april 2009),

they can not be used with the ACCESS controller without further ado.

For ACCESS subwoofers with this pin assignment we recommend operation with the

digital system controller K&F CD 44 and the K&F System Rack. Please refer to the CD 44

user's manual.

In order to operate current ACCESS subwoofers (standard since april 2009) with the

ACCESS controllers C5 / C9 / C10 and the Connector Panels CP1 / CP3 / CP1-B / CP3-B

we recommend ordering subwoofer with the option 'EP5 connector instead of Spea-

kon'. With this option you can operate ACCESS subwoofers with the ACCESS control-

lers and the Connector Panels according to this manual.

Operating safety and maximum performance of the ACCESS System can only be guar-

anteed when used with the C5/9 or C10 Controller. We cannot offer a warranty for

overload damage resulting from use with a controller aside from the ACCESS Control-

lers. If, despite this risk, the ACCESS System should be run with another controller,

please contact as for the corresponding information.

The ACCESS Controllers optimise the sound and operating safety of an ACCESS Sound

System. It assumes the role of a crossover and optimises the frequency-dependent pha-

se response and delay times. With the use of specially tuned filters (EQ), the ACCESS

Controllers optimise the ACCESS System’s frequency response.

A noteworthy function of the ACCESS Controller is its special limiter technology. With

other (universal) controllers, the gain of the selected power amplifiers must be known.

The limiter on the ACCESS Controller, on the other hand, uses a special control circuit

to determine the actual output voltage of the power amplifiers. The limiter then reduces

the input level only when the power amplifier actually provides more power than the

speakers can handle. The amplifier's gain and the position of the input level control for

the power amplifiers are insignificant for the limiter function of the ACCESS Controllers.

C5/9 Controller

The complete ACCESS System can be run with the C5/9 Controller. The C 5/9 is, thus,

capable of providing the signals for the top speakers T5/T9 as well as for the Bass Sys-

tems B5 or B10.

C10 Controller

The C10 Controller optimises the operations with the Bass System B10. Its possibilities

for operation include a configuration switch for various uses. It frees up the reserves

from the B10 for the sub-low range, thus providing a strong increase in bass perform-

ance.

Both ACCESS Controllers are compatible with the Kling & Freitag C2 Controller and

with most of the Kling & Freitag speaker systems. Because of this, the user has many

versatile possibilities to adjust the sound reinforcement to accommodate the needs and

requirements of a wide range of uses.

Important

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Kling-freitag K&F ACCESS T9 Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Kling-freitag K&F ACCESS T9